5 Ways to Overcome No Bootable Device

programing software
No Bootable Device

Laptop or PC users must know how to deal with no bootable devices. You must often experience the problem of no bootable device. This problem is an annoyance that appears when you just turn on the device. The device failed to read command messages from the user and eventually encountered an error. If you are experiencing this problem, don’t worry because this time we will discuss how to overcome the no bootable device on your PC or laptop.

What Causes No Bootable Device

Before discussing more deeply how to overcome a no-bootable device, then you must first know the cause. This problem is caused by a number of things that cause the device to crash when it’s new.

1. System crash

The first cause that is very likely to occur and result in a no-bootable device is due to a malfunction in the device’s operating system. In this case, the operating system used on the laptop or PC has an error and you even have to reinstall it. To know more about business art and entertainment you can visit this site festivaldelladriatico

2. Damage to the Hard Drive

A damaged hard drive may also cause a no-bootable device problem. Usually, the hard disk is not able to accommodate files so these components cannot translate commands from the user when the PC or laptop is just turned on.

3. Virus Infected Device

Another cause that causes a no-bootable device is a device that is infected with a virus. There are so many viruses lodged there, that the device becomes an error. In the end, any command entered in the device will never be read and no bootable device will occur. Therefore, always clean the virus on your device by installing a qualified and quality antivirus.

4. Configuration Error in BIOS

The wrong configuration or setting in the BIOS can also cause a no-bootable device. This is not widely realized by laptop or PC users. They tend to be ignorant and never check whether the configuration in the BIOS of a device is correct or not.

How to Overcome No Bootable Device

Don’t panic if there is no bootable device on your device. Because there are several ways you can do to solve this problem. This method is guaranteed to be easy for beginners and certainly works.

1. Checking Boot Priority

The way to solve a no bootable device is that you can check the boot priority in the BIOS. Ensure the primary disk containing the system data is in the first section to allow the system on your laptop to boot from the main hard drive first. In general, if the location is under another hard drive, you will have problems with this non-bootable device and so on.

To check the boot priority, follow these steps:

  • First, press F2 or Delete on boot to enter BIOS.
  • Once in the BIOS, select the Boot tab.
  • Make sure the Boot Priority option matches your primary hard drive. For example, here the primary hard drive is configured with legacy, so select the legacy option first.
  • Then press the Exit tab.
  • Then select Exit Saving Change to save the BIOS configuration changes.

2. Check Hard Drive

You need to make sure that your laptop’s hard drive or SSD is still readable. Of course, if it can’t be read, the device system can’t read the operating system files. These operating system files are on the hard drive attached to your laptop.

Further, the confirmation method is shown below. Press F2 to enter the BIOS first during the boot process. Enter the laptop BIOS Once in the BIOS, select the Main tab. For example, if an HDD or SSD is found in the SATA 2 column, this indicates that the memory is still readable. For example, it displays as SAMSUNG HD103SJ.

3. Change UEFI to Legacy

If the hard drive is still readable, there may be a problem with the BIOS configuration. One hint you can try is that you can first change the BIOS mode from UEFI to Legacy. This UEFI setting can cause memory loading to the PC/laptop to fail and a “No Boot” message appears.

You can follow these steps:

  • First, enter the BIOS.
  • Then click the Boot tab.
  • In boot mode, press Enter.
  • You will have two options later.
  • Please select Inheritance.
  • If you move to the Done tab.
  • Press Yes to save your BIOS settings changes.

4. Repairing BCD/MBR

If you have tried the previous method and it doesn’t work, there may be a problem with the MBR (Master Boot Record) which prevents the system data in the MBR from being read. This is why this bootable device problem is not showing up on your laptop or PC.

To work around this issue, change the MBR as follows:

  • First, prepare a Windows Bootable USB.
  • Then connect the USB to your laptop and start booting.
  • The Windows setup screen is displayed.
  • You can choose to repair your computer. In this case, advanced options will be displayed.
  • Now click on the command prompt. Select Command Prompt in Windows and later you will be directed to CMD.
  • Type the command bootrec /fix MBR and press Enter.
  • Enter Bootrec Fixmbr command in CMD.
  • Then type the command bootrect/fixboot and press Enter again.
  • Enter the command BootrecfixbootCMD Then type the command bcdedit/export c:\bcdbackup and press Enter.
  • Enter the command BCD backup from the command prompt Type the command attribc:\boot\bcd h rs and press Enter.
  • Then enter the command boot bcd Type the command ren c:\boot\bcd bcd.old and press Enter.
  • Enter the command bcdold Finally, type the command bootrec\rebuildbcd and press Enter.
  • Wait until the MBR repair process is complete.
  • Enter the command rebuild BCD When you type the letter Y to confirm the repair.

5. Unmount the Hard Drive

Apart from trying to connect your hard drive to another device, you can remove this component. For example, when your laptop’s hard drive or SSD is unreadable and very easy to peel. Because you need to remove the hard drive.

Follow the steps below to do a safe hard drive removal and not lose the data on it:

  • First, please disassemble the PC or laptop case.
  • Then find and disconnect the hard drive cable.
  • In this case, please reinstall properly and according to the procedure.
  • Check the power cycle of your PC or laptop and check the BIOS to make sure the hard drive is legible.
  • The process of removing the hard drive is complete.
  • If that doesn’t work, try changing the SATA cable first. Or, if your hard drive is damaged, you must replace it immediately to resolve this issue.
  • Those are some causes and ways to overcome the no bootable device on your PC or laptop.
  • Make sure you have done the correct procedure to resolve it. Always take good care of your device and don’t let viruses threaten the operating system so that the software easily crashes and interferes with your work.