Build Your Own Pc

how to build a computer

Both memory capacity and frequency affect computer performance. Some high-end cards are longer or use up even more PCI space. Make sure to check that beforehand to choose the appropriate case that could fit the graphics card.

how to build a computer

Memory will only be useful to you if the motherboard supports it; read that section for more information. Each new standard offers some additional speed and features, but not in all situations, so don’t feel as if DDR4 RAM, rather than DDR3, is an automatic must for you if you’re building from scratch. Just remember that RAM is not backward-compatible, so DDR4 will not work in a DDR3 slot. The higher the number in a memory’s standard, such as DDR4 2666, the faster it generally is. Faster memory designed for the same slot type will work in a slower slot, but save yourself some money and don’t leave any performance on the table you don’t have to. The most difficult and time-consuming part of the PC-building process happens long before you start looking for the screwdriver.

Step 9: Drive Connectors

You need to make sure the connectors for any fans/AIO pumps are plugged into the motherboard fan headers. You’ll also need to attach the front-panel audio cable, USB case connectors to the motherboard headers. The location of these headers varies by motherboard model, so we recommend consulting the manual to locate them. Don’t forget to connect the front-panel connectors, including power, reset, LED indicator, etc. because they’re crucial to the build as well. Installing these tiny headers can be very annoying and you’ll often find yourself reaching out to the darkest corners of the case to locate them. You might want to put that flashlight to use now for this step.

  • The PSU is the most critical component inside your PC case.
  • The protective cover will pop off as you lower the lever.
  • As such, make sure you do your research prior to making any selection.
  • In the same quality, building a laptop is cheaper than buying a laptop.

Once it’s in place, press the tension lever back down. But learning how to build a computer is still a satisfying experience, regardless of the prevailing situations. It may be overwhelming the first time you do it, but you’ll surely enjoy the process. We’ve put together a step-by-step guide on how to build a computer if you’re embarking on your first build. Hard Drives – if you use IDE, find the IDE port on the motherboard and the hard drive.

How To Build A Computer: A Beginners Guide To A New Pc

MSI’s Mystic Light Sync allows you to connect and control RGB devices inside and outside the case, delivering a brand new lighting experience thanks to the various color and mode settings. High temperatures can cause the system to shut down in order to protect important components, and may even cause permanent damage. Fans and heatsinks are therefore necessary in order to keep the CPU running cool. Plug the installation USB in a motherboard rear USB port, choose a fast red USB3 port or normal USB3 with blue insert. Turn on the computer, usually on first boot the BIOS will load, you can save and exit, restarting the PC.

How To Build Your Own Laptop

Mount the back- plate onto the back of the motherboard. Push it down towards the standoff and secure it with the little screw. Pressing down on the lock/ejector tabs that are located at the ends of the memory sockets.