In most PC cases, that’ll involve undoing two screws on the PCIe slot covers and removing them. Regardless of how challenging it can be to source the parts you need, learning how to build a PC is still a fulfilling task, regardless of what the best https://www.pieforthepeople.net/ graphics cards are going for right now. The process actually remains the same – you need to research and choose the components that will make up the the PC you’re trying to put together. After all, you want a PC that you can show off with pride.
We recommend the Ryzen X for an AMD-based build and the Intel Core i K for those leaning towards the blue team right now. You can also check out Intel’s other Alder Lake CPUs, but keep in mind that these new CPUs require a Z690-based platform to work. You may also need DDR5 memory modules to get the best results, thereby increasing the overall cost of your first PC. Our collection of the best CPUs will help you with all the available options on the market. Actually for a computer to function you also don’t need a hard drive, nor CD drive. If you have a proper setup, you can boot from the LAN.
Buying Your Components
We regularly check and list new components on our website, so you’ll always get the available and latest components without any hassle. The good news is that once you know your way around the insides of a PC, things start speeding up and knowing how to build your own PC becomes a time-saving skill. A master PC builder https://www.wikipedia.org/ can churn out a complete PC in under 30 minutes, and anyone with some experience should take less than two hours from start to finish . And sometimes, you build a PC and it just refuses to boot up at the first go. Maybe it’s a SATA cable that has come loose, or perhaps it’s a RAM stick that is not inserted correctly.
- Do not plug PCIe connectors into your EPS power connector.
- First, the case needs to have good airflow, so there should be lots of fan mounting spots.
- The RAM slots on a motherboard are located to the right of the CPU.
- First, we need to test that the machine is actually running as intended.
- Which way up you place the fan depends on your case and the airflow.
After that it’s simply a case of reattaching the fan to the tower, and plugging the 4-pin PWM fan header into the CPU Fan slot on the motherboard. Position the PSU in the bay with the fan pointing downward and the screw holes lining up with the holes on the back of the case. Secure the power supply with the provided screws, then drape the cables over the side of the case to keep them out of the way while you work on everything else. If you’re using a video card, now you’ll install it as well. The motherboard only has one video-card slot, so you should be able to find it easily .
Installing the power supply unit is as simple as screwing it into place with four screws at the back of the PC case. We recommend buying a modular PSU so you can avoid creating a cable mess inside your case. Once the PSU is in place, you can connect the 24-pin power connector and supplemental/CPU power connector to the motherboard.
Make sure it’s right side up by matching the pattern of cutouts to the arrangement of ports on the back of your motherboard. Secondly, see if your PC case has a large CPU cutout or window cut into the back of the motherboard frame. If it doesn’t you may want to install any CPU cooler backplates and M.2 solid-state drives at this juncture. If you’ve purchased some replacement or extra cooling fans, now is the time to install them where you need them. Try to keep your cooling setup balanced, so there’s as much air being drawn in, as is being blown out.