How To Build A Pc Guide For Beginners #yeswebuild

how to build a computer

Needing higher density, the market has developed 3D nand memory, layering memory on top of each other. MSATA drives originally were for laptops, but turned into the m.2 storage sticks we see today. Originally connected with SATA, the new versions connect directly to the motherboard’s PCIe lanes to provide blazing fast speed. Intel uses LGA, and the socket contains pins, making handling the CPU easier but needing care when fitting the CPU in the socket.

  • Identify your 8-pin EPS cable, and slide it up the back of the chassis, through the cable grommet and plug it into the 8 pin power slot at the top of the motherboard.
  • Look carefully at the cable ends and the connector on the drive and match them up.
  • If you’re converting video or gaming, the program you use might support multiple cores, in which case a higher number of cores is more important.
  • Processor/CPU – The Central Processing Unit is the “brain” of the computer.

An indicator on CPU and motherboard will show you the correct orientation. Cases might obstruct air flow causing some higher-end components with larger power draw to overheat. If you’re reapplying heat paste, be sure to remove the original heat paste with a lint-free cloth and https://www.pieforthepeople.net/ a little isopropyl alcohol. Your case will probably come with one or more intake or exhaust fans, and have room for adding more if you want them. Removable filters, which capture dust to keep your PC’s interior tidy and are easy to clean, are also common on higher-end cases.

Memory Ram

Memory is the bridge between external memory and CPU. All programs in the computer run in memory, so the performance of memory has a great impact on the computer and it also determines whether the operation of the computer is stable. The CPU https://www.wikipedia.org/ is a semiconductor integrated circuit chip that is mainly used to interpret computer instructions and process data in computer software. It can be said that the quality of the barebones computer and the brand machine is almost the same.

how to build a computer

And, that will be able to get some video editing done on the side too. However, there are plenty of people that need something with a bit more oomph. Computers are legitimately more powerful now than they’ve ever been, and there’s never been more options to build something that will tear through the best PC games like they were so much paper. But, powerful hardware like the Nvidia GeForce RTX 3080 and the AMD Ryzen X come at a high price. For instance, if you’re just going to be using your PC to do daily office work – like web browsing or writing up documents – you don’t need to drop thousands of dollars on a fancy gaming rig. But, before we get too ahead of ourselves, let’s get you all hooked up with everything you need to know about how to build a PC.

Installing The Psu

If you’re looking at Blu-Ray drives and Blu-Ray burners, though, pay attention to the read and write speeds. The higher the read speeds, the faster you can rip a Blu-Ray disc, and the faster the write speed on a burner, the faster you can burn a Blu-Ray disc. Obviously, you’ll have to pay more for higher speeds. Then, you can run your cables as shown, with the CPU plug on the far right and the other cords going through the other slots so they can effectively reach their ports. Removing the back panel of your case, you should find a slot at the bottom where the power supply will slide into place and screw in.

If you’ve plugged the switch into the wrong pins on the motherboard, it won’t work. The CPU box will contain a manual that tells you how to do it. The heat sink will contain either a heat sink sticker or heat sink grease to use when mounting it on the CPU.

Be sure to select a case which can fit all of your components, including your hard drive. The power supply powers all of your components in your computer. Some cases come with a power supply already installed, but others require you to provide your own.

Tags:
, , ,